Motive Power Industries MP2000C

Somebody's Large Digital Image Here
Data Sheet Information Compiled by: Jean-Denis Bachand
New: 26 May 2008 Artwork by: Jean-Denis Bachand
-
Engine Builder: Caterpillar Engine: 3516 (4/EPA Tier 2)
Bore: 270 mm / (11.0") Stroke: 299 mm /)11.8")
RPM Max/Min: 1800/450
Engine Horsepower 1963
Main Generator: KATO Model: 8P6.5-3400
Gear Ratio: 62:15 Speed: 70 mph
Trucks: 6-Wheel Configuration: C-C
Traction Motor Blowers: Delco (4) Model: Electrical Drive
Weight: 385,000 lbs Traction Motors: GM D78B (6)
Tractive Effort (starting) 128,000 lbs @ 25% Tractive Effort (continuous): 82,000 lbs @ 9.3mph
Multiple Unit Capability: Yes Dynamic Braking: Yes
Auxilary Generator: GM D-18 Alternator: Newage
Air Brake: Westinghouse Model: 26L
Quantity Built: 1 Date: 8/1998
- -
Exterior Dimensions MP2000C
Total Length 60'-02"
Wheel Diameter 40"
Truck Wheel Base 18'-07"
Height to Top Hood 14'-08.5"
Height to Top Cab 15'-07.5"
Cab Width 10'-04"
Hood Width 10'-01"
Height of Walkway 10'-08.5"
Walkway Width 3'-08.5"
Center Bolster 48'-06"
Center Front Truck to Front Pilot 3'-10"
Center Rear Truck to Rear Pilot 3'-10"
Distance between Truck Centers 57'-03"
Minimum Turning Radious 57 degrees
- -
Fuel Oil: 3900 Lubricating Oil: 82
Engine Cooling Water: 41.4 Sand Capacity: 26 cu. ft.
Options:
  • Q-Tron QES III Microprocessor
-
  • Trains, December 2007
  • Motive Power Technical Data Brochures

Back to MPI Data Sheets Index

Back to Builders